Autor Thema: Unwanted braking inside a tour (Zugfahrt).  (Gelesen 1828 mal)

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Unwanted braking inside a tour (Zugfahrt).
« am: 30. Dezember 2012, 13:46:01 »
Hello.

I have seen this before on my old layout, but did not bother to fix it.  Now I have the same problem on my completely new layout, which I have just started to test/use now.  Let me try to explain:

This is not a problem anywhere else than one place on my layout.  Inside a tour (Zugfahrt) I have a route (Fahrstrasse) where the train may stop if the next route is still busy.  This works fine.  But when the next route is in fact free, the train should not slow down at all.  But it does....  It slows down to braking-speed (in my case 30) for a few sexonds, and then goes back to full speed (70) again.  I cannot see why this happens.  I include a screenshot of the route.

Any ideas?

Best regards,
Per.

Zu diesem Beitrag gehören 1 Anhäng(e). Um diese zu sehen oder zum Download müssen Sie sich einloggen.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re: Unwanted braking inside a tour (Zugfahrt).
« Antwort #1 am: 30. Dezember 2012, 14:44:10 »
Hello again.

Just a little update...:

I do have the same problem several places in my layout, I re-checked now.  Also when only 1 train is running, so the next route cannot be busy.  It still happens that the train slows down to 30 and up again.  Very annoying.  Any help?

Per.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Stefan Lersch

  • Moderator
  • Senior-Mitglied
  • *
  • Beiträge: 6428
  • Ort: Brühl (bei Köln) Ort bei GoogleMaps suchen de
    • Infos zum Down-Syndrom alias Trisomie 21
Re: Unwanted braking inside a tour (Zugfahrt).
« Antwort #2 am: 30. Dezember 2012, 16:12:38 »
Hello Per,

this is because your Bremse contact is the same as the Prüf contact. That means that the train reaches the Bremse contact and slows down. At the same time it chechs if the next route is free. This may take a while depending on the speed of your central station and PC. To avoid this simply move the Prüf contact before the Bremse contact.
Viele Grüße,
Stefan
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    N-Anlage im Bau, Minitrix &amp Co., Tams MC 2.2.3, DCC
  • Rechnerkonfiguration:
    Quad Core 8 GB mit Win 10, 32"quot Bildschirm

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re: Unwanted braking inside a tour (Zugfahrt).
« Antwort #3 am: 30. Dezember 2012, 16:19:28 »
Hello, Stefan !

Yes, this was exactly what I intended to try out now.  But I did make all my routes with the internal route-making-assistent, so the test- and brake-contacts were entered automatically.  As the same.  OK, I will try to move the test-contact to the contact before the brake-contact, hope that does not make other problems.

Many thanks for your reply !!

All the best wishes,
Per.

  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.