Link solenoid devices command not working

[Steveh61]

I am running version 2015.1b premium edition and while in the track editor part of the program  I am getting a error message while using the "Link solenoid devices "command. The message reads  "No suitable digital system installed. Solenoid device link manager will be closed."
Obviously I do have a system installed  (Marklin Central station 2) as everything else seems to be working.
Any ideas.?
Thanks Steve

[Stefan Lersch]

Hi Steve,

I don't have a CS2 so I can only guess. But - seen your two problems with the CS2 - I have the feeling that your network setup is not correct. Obviously some parts work but others don't. Have you checked the firewall if all necessary ports are open?

[Steveh61]

My network is running fine. There are no problems there. My CS 2 and my PC are connected to a standard network switch . There is no firewall between the two.My firewall is on a router which in turn connects to the Internet. Both the PC and CS 2 are not having any connection problems talking to the Internet. I only have a problem with windigipet " link solenoid device command.i might have to reinstall the whole application after dei stalling it. Is there any special requirements that I need to be aware of.?
Thanks

[Markus Herzog]

Hello Steve,

you do not need the link function for the CS 2. It is just for CS 1 and ECoS 1/2. These is just necessary for this system because they do not communicate with Win-Digipet using addresses but objects.
The CS2 communicates via addresses and thus it does not have the need to link.

Regards
Markus