Autor Thema: Decoder-problem.  (Gelesen 4999 mal)

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re: Decoder-problem.
« Antwort #15 am: 05. Juni 2020, 13:01:49 »
Hello again.

I was getting desperate :)

I had changed EVERYTHING except the "gearbox"; the transmission from the motor to the wheels.  Could there be something wrong there?  I could not see or feel anything wrong when I checked.  But I removed the motor, and cleaned all the wheels very carefully, and re-oiled them (carefully, only 1 drop of oil).  Still the same problem. 

As a last resort, I added some very thin model-grease in stead of the oil.  This is a little thicker than the oil.
NOW IT WORKS!  It now runs very fine in both directions.

Strange....?

Best regards,
Per.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Stefan Lersch

  • Moderator
  • Senior-Mitglied
  • *
  • Beiträge: 6432
  • Ort: Brühl (bei Köln) Ort bei GoogleMaps suchen de
    • Infos zum Down-Syndrom alias Trisomie 21
Re: Decoder-problem.
« Antwort #16 am: 05. Juni 2020, 14:14:48 »
Hello Per,

yes, very strange! Thanks for the information! Good it works now.
Viele Grüße,
Stefan
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    N-Anlage im Bau, Minitrix &amp Co., Tams MC 2.2.3, DCC
  • Rechnerkonfiguration:
    Quad Core 8 GB mit Win 10, 32"quot Bildschirm