Autor Thema: Route-creation problem  (Gelesen 4661 mal)

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re:Route-creation problem
« Antwort #15 am: 18. Januar 2013, 11:03:43 »
Hello.

OK.  Tried more today: As we know, to create the routes from SkEinV to the tracks SkE1c to -1k.  This gives "Keinen Weg gefunden".  No matter if i set the switches first, or whatever.

Just now I tried the reverse way, from SkE1k to SkEinV.  This works !!!  Isn't that strange? Must be something I do not understand completely...?  I have creates thousand of routes before, ut never had this problem before.  What am I doing wrong now...? :D :D

Per.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Stefan Lersch

  • Moderator
  • Senior-Mitglied
  • *
  • Beiträge: 6433
  • Ort: Brühl (bei Köln) Ort bei GoogleMaps suchen de
    • Infos zum Down-Syndrom alias Trisomie 21
Re:Route-creation problem
« Antwort #16 am: 18. Januar 2013, 11:35:55 »
Hello Per,

I don't have access to WDP right now but you could check the Sprungmarken in that route. Probably there is a mistake.
Viele Grüße,
Stefan
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    N-Anlage im Bau, Minitrix &amp Co., Tams MC 2.2.3, DCC
  • Rechnerkonfiguration:
    Quad Core 8 GB mit Win 10, 32"quot Bildschirm

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re:Route-creation problem
« Antwort #17 am: 18. Januar 2013, 18:59:06 »
Hi.

The route is still the same as before.....  I have now also removed the 2 Sprungmarke, replaced by standard track symbols.  No change in the route-creating problem..

Per.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Stefan Lersch

  • Moderator
  • Senior-Mitglied
  • *
  • Beiträge: 6433
  • Ort: Brühl (bei Köln) Ort bei GoogleMaps suchen de
    • Infos zum Down-Syndrom alias Trisomie 21
Re:Route-creation problem
« Antwort #18 am: 19. Januar 2013, 01:09:36 »
Hello Per,

can you provide me with a new backup?
Viele Grüße,
Stefan
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    N-Anlage im Bau, Minitrix &amp Co., Tams MC 2.2.3, DCC
  • Rechnerkonfiguration:
    Quad Core 8 GB mit Win 10, 32"quot Bildschirm

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re:Route-creation problem
« Antwort #19 am: 19. Januar 2013, 10:18:48 »
Here it is, without any Sprungmarken in that actual route

Zu diesem Beitrag gehören 1 Anhäng(e). Um diese zu sehen oder zum Download müssen Sie sich einloggen.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Stefan Lersch

  • Moderator
  • Senior-Mitglied
  • *
  • Beiträge: 6433
  • Ort: Brühl (bei Köln) Ort bei GoogleMaps suchen de
    • Infos zum Down-Syndrom alias Trisomie 21
Re:Route-creation problem
« Antwort #20 am: 19. Januar 2013, 23:35:10 »
Hello Per,

I found it. 1) You have to select first begin and end in the assistent and then click the switches to the right direction. The assistent finds the way immediately.

2) If you don't do this the assisten searches to the right at the first switch and enters the area SkG. There it searches in 1a and there the Sprungmarke is not correct. The assistant gets stuck there and therefore cannot find any way.
Viele Grüße,
Stefan
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    N-Anlage im Bau, Minitrix &amp Co., Tams MC 2.2.3, DCC
  • Rechnerkonfiguration:
    Quad Core 8 GB mit Win 10, 32"quot Bildschirm

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re:Route-creation problem
« Antwort #21 am: 23. Januar 2013, 21:40:46 »
Hallo Stefan.

Sorry for the late answer, I have been sick in bed for some days.

I found the wrong Sprungmarke you mention.  In fact, there were 2 at the same place, but one of them had the incorrect direction.  So I deleted the one that was wrong.

So I tried again.  And now it works!  Without setting any switches or anything else.  So I guess that a mistaken Sprungmarke (even if it is in a place that will not be included in the route I want, but in a place where the Assistent clearly searches anyway..) makes the Assistent get stuck, so it does not suggest the other valid ways either.  Maybe it should be able to suggest the other valid routes anyway, and ignore the routes with problems..?

Thanks a lot for all your help, I really appreciate it !  Now I will continue to create new routes :D

Best regards,
Per.

  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Stefan Lersch

  • Moderator
  • Senior-Mitglied
  • *
  • Beiträge: 6433
  • Ort: Brühl (bei Köln) Ort bei GoogleMaps suchen de
    • Infos zum Down-Syndrom alias Trisomie 21
Re:Route-creation problem
« Antwort #22 am: 23. Januar 2013, 21:54:20 »
Hello Per,

I'm glad it works now. And If've been sick, too. ;)
Viele Grüße,
Stefan
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    N-Anlage im Bau, Minitrix &amp Co., Tams MC 2.2.3, DCC
  • Rechnerkonfiguration:
    Quad Core 8 GB mit Win 10, 32"quot Bildschirm