Autor Thema: What am I doing wrong (not possible to set speed on a loco) ?  (Gelesen 2231 mal)

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Hello.

Since this problem is only with one of my 70 locos, I am sure it is a mistake I have done here.  But I am not able to find it.  Can you help me?

Here is the problem:
In the main screen, in the "Loc taskbar", all work OK, except for one of my locos.  When I try to set a speed for this loco, the marker pops right down to 0 again at once, and the loco does not move.  I must do something wrong..?  All other locos work as normal, but not this one.

Best regards,
Per.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Edwin Schefold

  • Betatester
  • Senior-Mitglied
  • *
  • Beiträge: 6911
  • Ort: Düren NRW Ort bei GoogleMaps suchen de
    • MIST5
Re:What am I doing wrong (not possible to set speed on a loco) ?
« Antwort #1 am: 06. Februar 2013, 22:04:58 »
Hello Per

Please look into the Lok-measurement, from this Loco. There are a red line for Maximum Speed. Those Line is set into 0 Speed. Take them to the real max Speed and the Loco should by run.

I hope my english ist good enouth, to help you.  ::)
« Letzte Änderung: 06. Februar 2013, 22:44:49 von Edwin Schefold »
Mit dem Gruß eines freundlichen Modellbahners

Edwin Schefold
  • Win-Digipet-Version:
    2021.x und Beta
  • Anlagenkonfiguration:
    MM/DCC/MFX m. TAMS-MC 2.2.3, 2x Heller Booster 2x7,5A, M/C-Gleise, Car-System, 20x S88 - BMBT, Schalt-/Magnetartikel-/Signaldecoder - Viessmann, LDT und BMBT, UB-u. Kühn-Lokdekoder, Timer - BMBT, ESU-Servodecoder
  • Rechnerkonfiguration:
    PC 1,8GHz/1536MB/XP pro und Laptop i7/512SSD u. 1TB HDD /Win10

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re:What am I doing wrong (not possible to set speed on a loco) ?
« Antwort #2 am: 07. Februar 2013, 00:09:35 »
Hello Edwin.

I am sure your English is (as least) as good as mine  :D
The main thing is that we understand each other..

This solved the problem.  Thank you!  I do not understand how this has gone to Speed 0, I did not do that manually, for sure.

Best regards,
Per.

  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Stefan Lersch

  • Moderator
  • Senior-Mitglied
  • *
  • Beiträge: 6432
  • Ort: Brühl (bei Köln) Ort bei GoogleMaps suchen de
    • Infos zum Down-Syndrom alias Trisomie 21
Re:What am I doing wrong (not possible to set speed on a loco) ?
« Antwort #3 am: 07. Februar 2013, 07:59:48 »
Hi Per,

have you calibrated this loco and have you installed the update WDP 2012.1? We believe that there is a correlation between these aspects and the red line at 0.
Viele Grüße,
Stefan
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    N-Anlage im Bau, Minitrix &amp Co., Tams MC 2.2.3, DCC
  • Rechnerkonfiguration:
    Quad Core 8 GB mit Win 10, 32"quot Bildschirm

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 572
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re:What am I doing wrong (not possible to set speed on a loco) ?
« Antwort #4 am: 08. Februar 2013, 19:51:10 »
Hello.

The loco was calibrated in version 2012.  But I now wanted to re-calibrate it (in 2012.1), and had the problem.  This happened only to this one, not to any of the other locos.

Anyway, it is all OK now, thanks to the help I received.

So now I am working with the IZNF again, and have some problems (again).  I will write another post on this :(

Best regards,
Per.

  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.