Willkommen
Gast
. Bitte
einloggen
oder
registrieren
.
1 Stunde
1 Tag
1 Woche
1 Monat
Immer
Einloggen mit Benutzername, Passwort und Sitzungslänge
Übersicht
Forum
Hilfe
Suche
Einloggen
Registrieren
Datenschutz
windigipet.de
»
Win-Digipet - english forums
»
Win-Digipet Forum English
(Moderatoren:
Peterlin
,
Stefan Lersch
) »
WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
« vorheriges
nächstes »
Seitenanfang
Drucken
Seiten: [
1
]
Autor
Thema: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7 (Gelesen 3911 mal)
Tom Lang
Junior-Mitglied
Beiträge: 19
Ort:
Ottawa
Der Deutsch versteht, aber spricht besser Englisch
WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
am:
23. August 2015, 17:06:21 »
Hello,
My old Windows XP machine finally died, so I installed my copy of WDP Pro X.3 English on a different PC running Windows 7. The Windows 7 PC could not read the WDP disc at first, it would report bit errors, until I installed a driver I found posted in the German WDP forum by Karl-Heinz Battermann. With this new driver I was able to read the disc and successfully install WDP. Since Herr Battermann wrote the driver was for Pro X.3b, I also upgraded my WDP to version X.3b. But whenever I try to launch WDP now, I get an error message that the disc could not be verified, and I should insert the original WDP disc and try again (although it is already in the DVD tray).
What can I do?
Thanks
Tom
Gespeichert
WDP 2015 Premium - 2.8GHz Celeron- 1GB - WinXP SP3 - Fleischmann TwinCenter zum Schalten und Ruckmeldung uber LocoNet mit Uhlenbrock - Tams MasterControl zum Zugfahren - 2-Leiter Anlage aus Fleischmann Profi-Gleis
Markus Herzog
Administrator
Senior-Mitglied
Beiträge: 16898
Ort:
Rheinland
WDP-Entwickler
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #1 am:
23. August 2015, 18:49:09 »
Hi Tom,
try this:
Click with the right mouse button on the Win-Digipet symbol and select "Run as administrator" from the context menu. Does this help?
Regards
Markus
Gespeichert
Win-Digipet-Version:
WDP 2021.x Beta
Anlagenkonfiguration:
3-Leiter Anlage, Rollendes Material Märklin/Roco/Brawa/Mehano, Fahren: DCC, m3 via Tams MC, Schalten/Melden: Selectrix, BiDiB, Motorola (nur wenige Sonderaufgaben)
Rechnerkonfiguration:
Intel i7
Tom Lang
Junior-Mitglied
Beiträge: 19
Ort:
Ottawa
Der Deutsch versteht, aber spricht besser Englisch
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #2 am:
23. August 2015, 20:19:32 »
Hi Markus,
Thanks for your reply. Unfortunately your suggestion did not work any better. I still get the WDP pop-up telling me the disc could not be verified, although I can open the disc in Windows Explorer and see all the files and folders in it.
Any other ideas?
Tom
Gespeichert
WDP 2015 Premium - 2.8GHz Celeron- 1GB - WinXP SP3 - Fleischmann TwinCenter zum Schalten und Ruckmeldung uber LocoNet mit Uhlenbrock - Tams MasterControl zum Zugfahren - 2-Leiter Anlage aus Fleischmann Profi-Gleis
Markus Herzog
Administrator
Senior-Mitglied
Beiträge: 16898
Ort:
Rheinland
WDP-Entwickler
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #3 am:
23. August 2015, 21:10:52 »
Hi Tom,
I am not sure which driver you have installed. Was this a driver from Protect Disc:
https://www.protectdisc.com/download/Driver_Setup.exe
Maybe you try this one above.
Regards
Markus
Gespeichert
Win-Digipet-Version:
WDP 2021.x Beta
Anlagenkonfiguration:
3-Leiter Anlage, Rollendes Material Märklin/Roco/Brawa/Mehano, Fahren: DCC, m3 via Tams MC, Schalten/Melden: Selectrix, BiDiB, Motorola (nur wenige Sonderaufgaben)
Rechnerkonfiguration:
Intel i7
Tom Lang
Junior-Mitglied
Beiträge: 19
Ort:
Ottawa
Der Deutsch versteht, aber spricht besser Englisch
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #4 am:
23. August 2015, 21:33:01 »
Hi Markus,
Yes I think it is the same one. The file was dated 29/04/2013. But I tried installing yours anyway and it made no difference - I still get the verification failure message.
Tom
Gespeichert
WDP 2015 Premium - 2.8GHz Celeron- 1GB - WinXP SP3 - Fleischmann TwinCenter zum Schalten und Ruckmeldung uber LocoNet mit Uhlenbrock - Tams MasterControl zum Zugfahren - 2-Leiter Anlage aus Fleischmann Profi-Gleis
Tom Lang
Junior-Mitglied
Beiträge: 19
Ort:
Ottawa
Der Deutsch versteht, aber spricht besser Englisch
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #5 am:
24. August 2015, 13:22:38 »
Markus,
It still is not working, but I think I found something. I noticed under Uninstall Programs that there are two installed ProtectDisk programs: version 11 from the link you provided, and a version 10 helper program. I tried uninstalling the version 10 in case WDP was finding and using it instead of version 11. After rebooting, I tried to run WDP as administrator, and got the message "Installing required drivers" followed by the usual verification failure. But when I checked Uninstall Programs, there was version 10 again! I think my copy of WDP is always using version 10 instead of version 11, even re-installing it if it can't find it. How can I get WDP to use the correct version of ProtectDisk?
Tom
Gespeichert
WDP 2015 Premium - 2.8GHz Celeron- 1GB - WinXP SP3 - Fleischmann TwinCenter zum Schalten und Ruckmeldung uber LocoNet mit Uhlenbrock - Tams MasterControl zum Zugfahren - 2-Leiter Anlage aus Fleischmann Profi-Gleis
Adrian L
Senior-Mitglied
Beiträge: 166
Ort:
Australia
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #6 am:
24. August 2015, 21:48:05 »
If you have the professional version of Windows 7 (and in may be in other versions), there are options to run programs in prior versions of Windows. To access this you right click on the program, then select properties and then click on the Compatibility tab.
You should then see a check box that says, "Run this program in compatibility mode for:" with a drop down box for versions of Windows from Windows 95 to Windows 7. After you set the correct version, you should still use the run as administrator option to start the program. For more information, have a look at
http://www.howtogeek.com/howto/10436/using-program-compatibility-mode-in-windows-7/
«
Letzte Änderung: 24. August 2015, 22:10:47 von Adrian L
»
Gespeichert
Adrian
WDP 2018.2d on Intel i5 (8Gb RAM) running Windows 10 Professional (64-bit) with ESU ECoS 50200 version 4.2.7, ESU Mobile Control II and LDT HSI-88 USB running Marklin M-track based layout - and loving it!
Win-Digipet-Version:
2018.2d
Anlagenkonfiguration:
Marklin H0
Rechnerkonfiguration:
Windows 10 Pro (64-bit) Intel i5 (8Gb RAM) SSD
Tom Lang
Junior-Mitglied
Beiträge: 19
Ort:
Ottawa
Der Deutsch versteht, aber spricht besser Englisch
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #7 am:
25. August 2015, 16:01:37 »
Hello Adrian,
Thanks for the suggestion. I am running Windows 7 Home Premium Edition and which it turns out does support the option you describe. I changed the compatibility of WDP to run under Windows XP SP 3 - the same OS it was running under on my old system - and even ticked the checkbox to automatically run the program as administrator.
Unfortunately all to no avail, I still get the disc verification error!
I am still hoping that Markus or somebody else at WDP can tell me why WDP Pro X.3b does not run on my Windows 7 system when, according to some other user posts, it runs fine on their systems. And of course how to fix it on my system!
Regards
Tom
Gespeichert
WDP 2015 Premium - 2.8GHz Celeron- 1GB - WinXP SP3 - Fleischmann TwinCenter zum Schalten und Ruckmeldung uber LocoNet mit Uhlenbrock - Tams MasterControl zum Zugfahren - 2-Leiter Anlage aus Fleischmann Profi-Gleis
Markus Herzog
Administrator
Senior-Mitglied
Beiträge: 16898
Ort:
Rheinland
WDP-Entwickler
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #8 am:
25. August 2015, 18:05:25 »
Hello Tom,
did you read my personal message? The problem is, that WDP ProX never was created for Windows 7. With some luck it worked for some users, but also for many users not. We can´t explain how to fix this issue. Escpecially for the tools of other companies we used which have no running guarantee for Windows 7.
Regards
Markus
Gespeichert
Win-Digipet-Version:
WDP 2021.x Beta
Anlagenkonfiguration:
3-Leiter Anlage, Rollendes Material Märklin/Roco/Brawa/Mehano, Fahren: DCC, m3 via Tams MC, Schalten/Melden: Selectrix, BiDiB, Motorola (nur wenige Sonderaufgaben)
Rechnerkonfiguration:
Intel i7
Tom Lang
Junior-Mitglied
Beiträge: 19
Ort:
Ottawa
Der Deutsch versteht, aber spricht besser Englisch
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #9 am:
25. August 2015, 18:57:22 »
Hello Markus,
Thanks for pointing out your PM, I hadn't noticed it before, but now I have sent you a reply.
Regards
Tom
Gespeichert
WDP 2015 Premium - 2.8GHz Celeron- 1GB - WinXP SP3 - Fleischmann TwinCenter zum Schalten und Ruckmeldung uber LocoNet mit Uhlenbrock - Tams MasterControl zum Zugfahren - 2-Leiter Anlage aus Fleischmann Profi-Gleis
Stefan Lersch
Moderator
Senior-Mitglied
Beiträge: 6432
Ort:
Brühl (bei Köln)
Re: WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7
«
Antwort #10 am:
25. August 2015, 19:14:06 »
Hi Tom,
than have a look at my PM, too, please.
Gespeichert
Viele Grüße,
Stefan
Win-Digipet-Version:
WDP 2021.x Beta
Anlagenkonfiguration:
N-Anlage im Bau, Minitrix & Co., Tams MC 2.2.3, DCC
Rechnerkonfiguration:
Quad Core 8 GB mit Win 10, 32"quot Bildschirm
Drucken
Seiten: [
1
]
« vorheriges
nächstes »
Seitenanfang
windigipet.de
»
Win-Digipet - english forums
»
Win-Digipet Forum English
(Moderatoren:
Peterlin
,
Stefan Lersch
) »
WDP disc not recognized after upgrade to WDP Pro X.3b in Windows 7